How to wash leather work boots. There are different types of boots that require maintenance, depending on the material of the boots. If you work in industry, warehouse, etc.
Your boots do it hard to protect your feet from heavy machinery and falling sharp objects.
To make your work boots last longer and to avoid spending money on new boots every month or two, keep them clean regularly and also know how to wash your work boots.
Work boots are excessively involved in dust, oil, dirt, and many other substances, and if they are not
cleaned over time, they will wear out faster than well-cared-for boots.
Instead of putting boots in a bucket of water, there are good ways to clean boots inside and out without compromising quality.
There are several methods to guide you in washing men's work boots.
Alternatively, we've also posted about the best waterproof shoes for work.
How to wash smelly work shoes?
How to wash work shoes
If you are uncomfortable with the smell of your work shoes. There are tips and tricks to keep them smelling like new.
The smell in work boots also comes from the sweat and socks on your feet. This is an unpleasant condition and it can be embarrassing to put up with the funky smell of shoes.
Following are the ways to get rid of shoe odor completely.
By Using Baking Soda
It's the fastest way to ditch your work boots and smell the frustration. Baking soda has a strong tendency to absorb odors.
Baking soda helps absorb both the outside and inside odor. This is the best way to wash work shoes and also the most economical way.
Steps to follow
All these steps will help you know how to wash smelly work boots and you will love going to work with your boots on.
Step 1: You need 1.2 tablespoons of baking soda, this depends on the size of the boots. If the boot size is large enough, you may need more baking soda.
2nd step: Place the baking soda on the heel of the shoes.
Step 3: Now you need to shake the baking soda to cover the entire insole of the shoe. Shake just enough to spread the baking soda all over.
4th step: wait overnight and wake up in the morning at work, take out all the baking soda from the trunk. All smell will disappear.
Also Read: Best Waterproof Winter Hunting Boots
By Using Lemon Peels
This is another alternative method to say goodbye to bad shoe smell and wash your work shoes. Lemon is citrus and antibacterial. It tends to make your boots look fresh and eliminate the smell altogether.
Cut small slices of lemon and place them in the boots, spreading them evenly on the insole of the work boots. Only remove the shells overnight and you will have a good result the next morning
How To Clean Leather Work Boots With Household Items?
Having a pair of boots will cost you time and money and you will always get shoes in good condition. Many owners do not know how to carefully clean leather boots inside and out.
In this section of the article, I'll show you how to clean leather work boots with household items to save money and care more about your shoes.
There are several cleaners for leather work boots and we will go through some of the easiest ways to know how to clean leather work boots.
How To Wash Leather Boots Inside?
Baking Soda
Sodium bicarbonate is one of the most common and versatile household items with different characteristics. Here we are going to use it to clean leather work boots.
Step 1: If you have sticky mud on your work boots, it is mandatory to remove that mud with liquid soap.
Step 2: Once you have thoroughly removed the mud from the pair of boots. Pour a sufficient amount of baking soda.
Step 3: Now gently rub the surface of both pairs of boots and the inside of the boots with a soft cloth to dry completely.
Bottom line: let the soda sit in the boots overnight to see the expected results the next morning. More time means more absorption of mud and other stains.
Toothpaste
It's the easiest method to remove scuff marks from the surface of boots that still look odd. Toothpaste is the standard item in our homes and is easily accessible.
1st Step: Spread the toothpaste over the entire surface of the boot, you can use gloves to spread the toothpaste over the entire surface.
2nd step: Now use a cloth or towel to rub the surface to remove the streaks and wait a few hours to see the result.
In a nutshell: cleaning the surface of the boot with toothpaste will be an acute reaction and the result will appear soon. In the end, you will see the beautiful result of this method.
Dish Soap
This is another great inexpensive household item to see how effectively it can clean our leather boots. It is used for various cleaning purposes such as cleaning outdoor furniture, kitchen appliances, and much more.
Unlike other materials, leather is water-resistant and the use of detergent and water solutions can easily solve our problem without any adverse effects on the case surface.
Follow the steps below to see how to wash your work boots with Dish Soap.
- Remove all dirt and grime from the surface of the boot as it will trap the soap solution so it can
work properly and digest the dust. - Remove shoelaces.
- Dip a towel in the detergent mixture and wipe each pair of boots with this towel.
- Now use a clean towel to remove the detergent from the surface of the boot.
- Take a dry towel and rub the boot vigorously to dry it. Great, that was so fast. You are done!
In short, dishwashing liquid is a powerful agent that we use at home to clean various appliances. After applying the previous steps, allow the boots to drain all water from the surface.
How do you wash work shoes in the washing machine?
If you are inexperienced in using a washing machine, cleaning your work boots in the washing machine can be a threat.
How to wash boots in the washing machine?
A single mistake can become a serious problem, such as the washing machine stopping spinning due to poor boot placement in the washing machine. To do it the right way, follow the steps below to avoid your washing machine and work shoes.
Steps to follow:
Step 1: The night before you wash your leather boots, sprinkle enough baking soda on each pair to cover all surfaces.
2nd step: remove the shoelaces. Place them in a laundry bag to prevent them from spinning. Put them in the washing machine and use a brush cleaner or an old toothbrush to remove as much dust and dirt as possible.
3rd step: Wrap the boots with at least 2 towels. Put them in the washing machine. The purpose of the towels is to prevent the boots from tearing in the washing machine.
Step 4: Run the washer on a cold (never hot) cycle after adding liquid detergent. The duration depends on your washing machine, it can vary from 30 to 40 minutes.
Step 5: Remove your leather boots from the washing machine and place them outside in the sun to dry.
CAUTION!
Do not use a dryer to dry your boots quickly. The heat from the dryer can destroy the material of your boots. Awesome! You are done!
How to wash work shoes in the washing machine?
Answer: Hand washing work boots is recommended because using a washing machine requires precautions and care to avoid damage to the boots or the washing machine.
Leather boots can be a bit tricky to wash in the washing machine, if you want to know how to clean work boots in the washing machine, read below.
What do you need?
- Dirty leather boots
- A washing machine
- Sodium bicarbonate
- A towel
- Laundry bag
- Brush cleaner
How to wash steel-toed shoes?
Steel toe shoes are very durable and protect your feet. It has a thick front design that prevents your feet from crushing heavy objects in factories, warehouses, industries, etc.
You cannot expect lasting protection from these boots if you do not know how to clean work boots and you will end up with a continuous decline in the quality of these work boots.
The owner should know how to wash my work shoes regularly to enhance their quality and improve their durability. These boots are normally expensive and if you are an employee you cannot afford to buy a new pair of shoes over time.
Soapy water to clean your steel-toed shoes
It is a very simple method to clean your steel-toed shoes with a microfiber cloth and soapy water.
Steps to follow:
- Take any bowl or container and mix a few amounts/drops of dish soap in water.
- Submerge the microfiber cloth in the bowl of water.
- Rub the surface of the shoes with a microfiber cloth and continuously circulate your hand while holding the cloth until you see all the mud on the surface has been removed.
- Take another dry cloth and soak it in water if:
How To Clean Suede Work Boots?
Dry your boots with a cloth or towel and use any brush to clean the dirt on the surface of the boot. Use the brush in the same pattern and use an eraser against stubborn scuff marks (It may take some time depending upon how dark the marks are).
Rub a wet cloth on the entire surface one or two times to bring some shine to it.
How To Clean The Outside Of Steel Toe Boots?
Out of different ways, the simple way is to clean the outside of steel toe boots using dish wash. Use a mixture of dish wash and water in a bowl.
Take a microfiber cloth and dip it into the bowl. Use cloth all over the boot surface. Now take a dry cloth and dip it in simple water to take off the residue of dish wash from the boot surface. Leave the boots for a night at room temperature to dry.